Technogel Mixpasto 60 Use And Maintenance Instructions page 24

Select EXP REG using the LEFT KEYS.
Insert the key in the USB port (see SAVE).
Select "Y" (YES) with the RIGHT ARROW: the
EXP REG
machine downloads the ALARM REG.
The downloaded file is called "al.par" (txt file
openable from NOTEPAD or EXCEL).
Select DATE TIME using the LEFT KEYS.
Press ENTER to access the DATE TIME menu
where it is possible to set the following
parameters:
Y year
DATE
M month
TIME D day
Use the LEFT ARROW to select the entry of
interest and change the parameter value with
the RIGHT ARROW.
The new date and time setting is memorised
when exiting the menu (ESC top-left).
The intervention
programmed when the set temperature is
reached
Select SETUP using the LEFT KEYS.
Press ENTER to access the BUZZER menu
with the entries:
BEEPRI (1 and 2)
SETUP
BEEPRA (1 and 2)
Select the wanted entry using the LEFT KEYS
(e.g. BEEPRA 1).
The RIGHT KEYS adjust the temperature,
displayed on the same row.
The set values are memorised by selecting
ESC (top-left of screen).
ATTENTION
The machine must never operate empty!
Product discharge
The product is discharged by the tap on the front of the machine: act
anti-clockwise on the control knob, turning twice. The knob has an
indicator (dot) to indicate the closed tap position (see fig. 4.3).
Cycle stop
Press STOP to interrupt the functioning cycle (normal/reduced).
See par. 5.4 for the machine stop methods.
THIS MANUAL IS THE PROPERTY OF
H time
M minute
S second
of a buzzer can
setting of temperature at
which the beep must
intervene in heating
setting of temperature at
which the beep must
intervene in cooling
–
TECHNOGEL SpA
24
be
Fig. 4.3
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
Page 24 of 52