Technogel Mixpasto 60 Use And Maintenance Instructions page 29

5.3 FUNCTIONING METHODS
The machine has an exclusively manual functioning that can be activated by the operator through the keys
on the control panel.
The functioning cycle is only possible as long as all safety and protective systems are installed and active.
5.4 STOPPING METHODS AND RELATIVE RESETS
5.4.1 Voluntary stopping method
The machine functioning interrupts by activating the STOP button (pos.10, fig. 4.1), without interrupting
power.
Stop is also possible by activating the START control that disconnects power to the auxiliaries and to the
control circuits.
Isolate power by disconnecting the current socket plug: this enables the safe execution of maintenance
operations.
5.4.1.1 Reset after a voluntary stop
Once functioning is voluntarily stopped, machine restart is possible by pressing the START button (also see
par. 4.1).
5.4.2 Emergency stop
In case dangerous situations for the operator or for any exposed person or for the machine occur during the
work cycle, the functioning cycle can be immediately stopped by extracting the power plug from the current
socket: it must, therefore, be easily accessible for the operator.
5.4.2.1 Reset after an emergency stop
Proceed as follows after having solved the problem that made the emergency stop necessary:
- reset the safety conditions required for production cycle restart;
- insert the current plug in the power supply socket;
- the authorised operator can control the functioning cycle restart as set out above, after having verified
there are no dangers for the exposed people.
5.5 CONTROL OF THE SAFETY DEVICES
ATTENTION
Check the correct functioning of the safety devices before the start of every work cycle.
•
Check the machine hood is secured to the frame by means of the specific screws, before every machine
start.
•
Check the lid of the tank is properly closed, before every machine start.
•
Check the machine does not start with the lid open and that the alarms intervene: sound (beep) and
visual (on display).
THIS MANUAL IS THE PROPERTY OF
–
TECHNOGEL SpA
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
29
Page 29 of 52