- any upstream and downstream safety devices of the energy power supply lines (such as residual-current
devices, earthing systems, safety valves, etc.) provided by the legislation in force in the country of
installation;
- tools and consumption materials required for assembly and installation;
- materials, tools and equipment required for any machine acceptance tests.
1.5
DECLARATION
Attached to this manual.
1.5.1
Identification plate
This machine is manufactured in an EU country and must,
therefore, meet the safety requirements of Machinery
Directive 2006/42/EC in force since 29 December 2009.
The EC Declaration of Conformity is attached to this
document.
This conformity is certified and the machine has the "EC"
marking on the support structure, as shown in figure 1-1.
The EC marking and data plate must not be removed or
damaged. It shows the data indicated in fig. 1-2:
THIS MANUAL IS THE PROPERTY OF
OF CONFORMITY
Fig. 1-1 – Plate position
R
ICE CREAM EQUIPMENT AND MACHINES
TIPO MACCHINA / Machine Type:
ALIMENTAZIONE / Source:
POTENZA / Power:
TECHNOGEL SpA
MATRICOLA N° / Serial Number:
CORRENTE P. C. / Full Load Current:
GAS FRIGORIGENO / Refrigerant:
Fig. 1-2 – Data on the plate
–
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
4
Page 4 of 52
Via Boschetti, 51
24050 Grassobbio (BG) - ITALY
Website: www.technogel.com
E-mail: info@technogel.com
Tel.: +39 035 4522062 - Fax: +39 035 4522682
ANNO / Year:
QUANTITA' GAS / Gas Quantity: