Attached Documentation - Technogel Mixpasto 60 Use And Maintenance Instructions

The display shows the wording
"E00 + RETE OFF"
The display shows the wording
"E11 + PT100-S0"
The display shows the wording
"E12 + PT100-S1"
The display shows the wording
"E13 + PT100-S2"
The display shows the wording
"E14 + PT100-S3"
The display shows the wording
"E15 + TMAX R"
The display shows the wording
"E16 + TMAX F"
The display shows the wording
"E21"
The display shows the wording
"E22"
The display shows the wording
"E23"
The display shows the wording
"E09 + G MIN"

8 - ATTACHED DOCUMENTATION

8.1 LIST OF ATTACHED DOCUMENTS
- List of equipment
- EC Declaration of conformity (see Chap. 1)
- Wiring diagram
THIS MANUAL IS THE PROPERTY OF
There was a black-out during the cycle:
this wording appears upon restart.
Faulty tank temperature sensor
Faulty inlet glycol temperature sensor
Faulty bottom outlet glycol temperature
sensor
Faulty top outlet glycol temperature
sensor
Exceeding of limit time for heating
Exceeding of limit time for cooling
Cooling cycle not regularly completed
due to: no power supply extension
Stop cycle not regularly completed due
to: no power supply extension
Preservation cycle not regularly
completed due to: no power supply
extension
The glycol level is too low
–
TECHNOGEL SpA
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
38
Page 38 of 52
When the current is back, the machine
automatically starts in the same
conditions of when the black-out
occurred.
Press ENTER: the alarm wording
disappears.
The machine locks and cannot be
released.
Contact the Technical Assistance
The machine locks and cannot be
released.
Contact the Technical Assistance
The machine does not lock, only visual
alarm present. Contact the Technical
Assistance
The machine does not lock, only visual
alarm present. Contact the Technical
Assistance
The machine does not lock, only visual
alarm present.
Check the stirrer speed in relation to
the density of the mix
Contact the technical assistance if the
alarm repeats
The machine does not lock, only visual
alarm present.
Check the stirrer speed in relation to
the density of the mix
Contact the technical assistance if the
alarm repeats
Assess the possibility of repeating the
cycle
Assess the possibility of repeating the
cycle
Assess the possibility of repeating the
cycle
Contact the technical assistance