Manufacturer Data; General Safety Warnings - Technogel Mixpasto 60 Use And Maintenance Instructions

2.2

MANUFACTURER DATA

Name:
Registered office:
Comp. Reg. Court of Bergamo
E.A.I. of Bergamo
VAT No. - Tax Code
2.3 CHARACTERISTICS OF THE TREATED PRODUCT
The MIXPASTO 60/120 PASTEURISER is designed for preparing bases and mixes for the production of ice
cream, which recipe is the responsibility of the machine user.
The manufacturer only prescribes that the percentage of dry product in the mix be less than 42%.
2.4 NOISE
The noise level during normal functioning must never exceed 70 db(A).
2.5 ADMITTED ENVIRONMENTAL CONDITIONS
Install the machine in closed premises with adequate micro-climate for the presence of operators and
product processing.
Avoid atmospheres polluted by vapours or gas, float dust, bacterial loads, insects or anything else that might
endanger the product's hygienic conditions or the health of operators.
The rear part of the machine must be detached from wall or other impediments for sufficient air to circulate:
leave a space of at least 50 cm.
We recommend the work environment temperature to be below + 35°C, without direct exposure to sun and
to other heat sources.
ATTENTION
The machine is not designed to function in potentially explosive atmosphere.
Its installation and use in such environments is, therefore, forbidden.
3 - INSTALLATION
3.1

GENERAL SAFETY WARNINGS

•
Wear suitable protective equipment for the operations to be carried out.
Clothing must adhere to the body and resist to cleaning products.
THIS MANUAL IS THE PROPERTY OF
Tab. 2-2
TECHNOGEL SpA
Via Boschetti n°51
24050 GRASSOBIO (BG) – Italy
Tel. 035-4522062
Fax 035-4522682
www.technogel.com
info@technogel.com
No. 12583
No. 166982
IT 00709420160
TECHNOGEL SpA
7
–
ALL REPRODUCTIONS, EVEN PARTIAL, ARE FORBIDDEN
Page 7 of 52