Honeywell Performance HDZP252DI User Manual page 36

36 | Performance Series IR 1080p IP PTZ Camera User Guide
Picture Settings
Parameter
Profile
Style
Brightness
Contrast
Saturation
Chroma CNT
www.honeywell.com/security
Figure 5-1 Camera Setup - Picture Window
Table 5-1 Camera Picture Configurations
Function
Select from Normal, Day, Night. Settings changed will only affect the selected
profile.
Select from Soft, Standard, and Vivid lighting and image styles.
Adjusts video brightness. Choosing a higher value increases the video
brightness. Adjustments to this value affects the brightness of the video. Select
from 0 to 100. The recommended range is between 40 and 60. The default
value is 50.
Note The video can become hazy if this value is too high.
Adjusts video contrast. Choosing a higher value increases the contrast. Select
from 0 to 100. The recommended range is between 40 and 60. The default
value is 50.
Note The video can become hazy if this value is too low. If this value is too
high, then the dark parts of the video could lose details, and the bright
parts of the video could become overexposed.
Adjusts video color saturation. Choosing a higher value increases the color
saturation/strength. This value has no effect on the general brightness of the
video. Select from 0 to 100. The recommended range is between 40 and 60.
The default value is 50.
Note You might see a distortion in grays if the white balance is turned off.
Adjusts video chroma color value. Choosing a value changes the color
chroma/hue. This value has no effect on the general brightness of the video.
Select from 0 to 100. The recommended range is between 40 and 60. The
default value is 50.