Quality Of Service (Qos) Configuration - Proxim Tsunami MP-8100 Series Installation And Management Manual

NOTE: Based on the Operation Type, the user can allow or deny the association of the MAC ACL profile to a SU .
3. Click OK.
To add entries to MAC Access Control table
1. Click Add in the MAC Access Control screen. The MAC ACL Add Row page appears.
2. Enter the MAC Address and Comment, and then select Enable/Disable to enable or disable Entry Status of the
MAC Address.
3. Click Add.
NOTE:
• MAC Access Control authentication is available only for BSU.
• The maximum number of MAC addresses that can be added to this table is 250.

4.6 Quality of Service (QoS) Configuration

The Quality of Service (QoS) feature is based on the 802.16 standard and defines the classes, service flows, and packet
identification rules for specific types of traffic.
4.6.1 QoS Concepts and Definitions
The software supports QoS provisioning from the BSU only. You may define different classes of service on a BSU that can then
be assigned to the SU that is associated, or that may get associated, with that BSU.
You can create, edit, and delete classes of service that are specified by the following hierarchy of parameters:
•
Packet Identification Rule (PIR) – up to 64 rules, including 18 predefined rules
•
Service Flow class (SFC) – up to 32 SFCs, including 8 predefined SFCs; up to 8 PIRs may be associated per SFC
•
Priority for each rule within each SF class – 0 to 255, with 0 being lowest priority
•
QoS class – up to 8 QoS classes, including 5 predefined classes; up to 8 SFCs may be associated per QoS class
4.6.1.1 Packet Identification Rule (PIR)
A Packet Identification Rule is a combination of parameters that specifies what type of traffic is allowed or disallowed. You
can create up to 64 different PIRs, including 18 predefined PIRs. Also, you can create, edit, and delete PIRs that contain none,
one, or more of the following classification fields:
•
Rule Name
•
IP ToS (Layer 3 QoS identification)
•
802.1p tag (layer 2 QoS identification)
•
IP Protocol List containing up to 4 IP protocols
•
VLAN ID
•
PPPoE Encapsulation
•
Ether Type (Ethernet Protocol identification)
•
Up to 4 TCP/UDP Source port ranges
•
Up to 4 TCP/UDP Destination port ranges
•
Up to 4 pairs of Source IP address + Mask
Tsunami MP-8100 Installation and Management Guide
Advanced Configuration
68