Services: Configuring The Passwords - Proxim Tsunami MP-8100 Series Installation And Management Manual

3. Select the type of file to upgrade from the File Type list:
a. Config: To retrieve the configuration file from the device.
b. Event Log: To retrieve the event log file from the device.
c. Temperature Log: To retrieve the temperature log file from the device.
4. Click Retrieve to initiate the operation and retrieve the file to the TFTP Server.
NOTE: If the device is in default configuration, there will be no config file to upload. Similarly, Event Log cannot be
uploaded if there is no Event Log created on the device.

5.3 Services: Configuring the Passwords

SNMP version, SNMP passwords, and SNMP Trap Host Table parameters can be configured to prevent unauthorized access.
Each management interface can be configured with its own password. Each of the three management interfaces
(HTTP/HTTPS, Telnet/SSH, and SNMP) is arranged in tabs under the Services link of MANAGEMENT tab in the Main Left
Panel.
The following special characters are not allowed for setting passwords for Telnet/SSH, HTTP/HTTPS, and SNMP v2/v3: & / \ ' "
= ? & and blank space.
NOTE: The passwords in the Services screen are configurable.
5.3.1 HTTP/HTTPS
Tsunami MP-8100 Installation and Management Guide
Figure 5-10 HTTP/HTTPS
System Management
136