Quality Of Service (Qos) - Proxim Tsunami MP-8100 Series Installation And Management Manual

Basic Configuration
on the logical LAN or WAN segment. They simplify allowing traffic to flow between hosts and their frequently- used or
restricted resources according to the VLAN configuration.
MP-8100 devices are fully VLAN-ready; however, by default, VLAN support is disabled. Before enabling VLAN support, certain
network settings should be configured and network resources such as VLAN-aware switches should be available, based on
the type of configuration.
VLAN Configuration (Bridge Mode only).
For details on how to configure VLAN parameters, refer to

3.6 Quality of Service (QoS)

NOTE: Quality of Service is configured on the BSU.
The Quality of Service (QoS) feature is based on the 802.16 standard and defines the classes, service flows, and packet
identification rules for specific types of traffic. The main priority of QoS is to guarantee a reliable and adequate transmission
quality for all types of traffic under conditions of high congestion and bandwidth over-subscription.
Quality of Service (QoS) Configuration
For a complete discussion on QoS, see
There are already several pre-defined QoS classes, SFCs and PIRs available that you may choose from which cover the most
common types of traffic. If you want to configure something else, you start building the hierarchy of a QoS class by defining
PIRs; you define the QoS class by associating those PIRs to relevant SFCs with priorities to each PIR within each SFC. Qos can
be applied on standard 802.3 ethernet frames as well as PPPoE encapsulated frames.
39
Tsunami MP-8100 Installation and Management Guide