Installation and Initialization
This chapter describes the steps required to install and mount the MP-8100 Series units, and to align the antenna. If you are
already familiar with this type of product, refer to the Tsunami MP-8100 Quick Installation Guide for streamlined installation
procedures.
This chapter covers the following topics:
•
Hardware Overview
•
Product Package
•
Installation Procedure
Step 1: Plan for Installation
–
Step 2: Choose a Location
–
Step 3: Gather Required Tools
–
Step 4: Unpack the Product Package
–
Step 5: Assemble the Cable
–
Step 6: Assemble Mounting Hardware
–
Step 7: Mount the Unit
–
Step 8: Plug in the Cables
–
Step 9: Connect the Antenna (Connectorized Version Only)
–
Step 10: Install Surge Protector
–
Step 11: Ground the Unit
–
Step 12: Power on the Unit
–
Step 13: View LEDs
–
Step 14: Align the Antenna
–
•
Initialization
ScanTool
–
Setting the IP Address with ScanTool
–
•
Logging in to the Web Interface
•
Factory Default Configuration
Tsunami MP-8100 Installation and Management Guide
2
13