Logging In To The Web Interface - Proxim Tsunami MP-8100 Series Installation And Management Manual

2.4.3.1 Assigning the IP Address Manually
1. Select the IP Address Type as Static and then enter the appropriate IP Address, Subnet Mask, and the Gateway IP
Address parameters.
2. Enter the SNMP Read/Write password in the Read/Write Password field. By default, it is public.
3. Click OK to save the details.
The device automatically reboots after clicking OK.
By clicking Rescan, verify whether the changes are applied or not. Then, click Web Configuration to open the web
interface.
2.4.3.2 Assigning the IP Address Dynamically
NOTE: Before setting the IP Address Type as Dynamic, ensure there is a DHCP server in the network.
1. Select the IP Address Type as Dynamic. The IP Address, Subnet Mask and the Gateway IP Address fields get
disabled.
2. Enter the SNMP Read/Write password in the Read/Write Password field. By default, it is public.
3. Click OK to save the details.
The device automatically reboots after clicking OK. By clicking Rescan, verify whether the changes are applied or not. Then,
click Web Configuration to open the web interface.

2.5 Logging in to the Web Interface

Once the device is connected to your computer, use a web browser to configure and monitor the device. Enter
http://169.254.128.132 (the device default IP address) in the address bar.
The user is prompted to enter the username and password to access the wireless device.
The default User Name is admin and Password is public.
Tsunami MP-8100 Installation and Management Guide
Figure 2-4 Modifying the IP Address
Figure 2-5 Login Page
Installation and Initialization
30