Installing In A Rack (Sw1024 And Sw1148 And Sw1124); Installing Free Standing (All Models) - Netstreams DigiLinX Installation And Design Manual

Plug in the power cord.
3.

Installing in a Rack (SW1024 and SW1148 and SW1124)

The SW1024 and SW1048 are mounted in a rack with rack ears.
Install the rack ears on the SW1024 or SW1048.
1.
Using the rack ears, install the SW1024 or SW1048 in a rack.
2.
Plug in all of the Ethernet connections.
3.
Plug in the power cord.
4.

Installing Free Standing (all models)

To install a SwitchLinX as free standing, complete the following steps:
Plug in all of the Ethernet connections.
1.
Plug in the power cord.
2.
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
10-5
www.netstreams.com.
SwitchLinX