Chapter 4: Speakerlinx; Sl220 Specifications; Sl250 Specifications - Netstreams DigiLinX Installation And Design Manual

The SpeakerLinX is the heart of the DigiLinX system. It contains a built-in web server
and amplifier, and can be placed installed nearly anywhere. Typically, the
SpeakerLinX is installed very close to the speakers.
CAUTION!
connector into the speaker connection causes damage to the amplifier and voids the
warranty.

SL220 Specifications

8 Ohms Stereo Power
4 Ohms Stereo Power
Frequency Response
Signal-to-Noise Ratio
Input Impedance
THD +N
Input Connectors
Output Connectors
Dimensions
Weight
NetPower

SL250 Specifications

8 Ohms Stereo Power
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
Connecting the power connector incorrectly or plugging the power
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
20 watts/channel
12 watts/channel
20-20KHz, +/-db
95 dB
17K Ohms
1% (20 Hz to 20KHz)
@8 Ohms
RJ45 (EIA568a)
4-pin Phoenix
Connector (speakers)
3.625" high x 2.875" wide x 1.75" deep
(91mm x 72mm x 44mm)
0.5 lbs. (0.23Kg)
12
35 watts/channel RMS
www.netstreams.com.
Chapter
4
SpeakerLinX
4-1