Eim Products; Keylinx™ Kl101/201 - Netstreams DigiLinX Installation And Design Manual

DigiLinX Installation and Design Guide

EIM Products

KeyLinX
Legend
CAT5
2-10
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Each PL228 can support one SpeakerLinX, MediaLinX, or TouchLinX.
The SpeakerLinX SL250 requires the use of the PL750 or PL250.
NOTE:
Each PL250 can support one SL250 SpeakerLinX and one TouchLinX.
Each PL600 can support DigiLinX devices that equal a total NetPower of 84 or
less, unless an SL250 is in the project. If an SL250 is in the project, you must use a
PL750.
Each PL750 can support DigiLinX devices that equal a total NetPower of 168 or
less.
The Expansion Interface Module (EIM) port on a SpeakerLinX provides an interface
for additional audio and control products.
™
KL101/201
The KeyLinX KL101 and KL201(as shown in Figure 2-13) are single-gang, in-wall
hard button keypads that control up to four audio sources with presets. Both models
feature an IR window for IR pass-through to a local source connected to an Audio Port.
The KL201 also features an embedded microphone and a Talk button for IP intercom.
Both products connect to the SpeakerLinX and Audio Port using an EIM splitter and
CAT5 cable (see Figure 2-14). Both products also have an additional connection for an
IRLinX.
Figure 2-13 KeyLinX 101 and 201
T
he EIM CAT5 cable length of all EIM connections together cannot be more than 60
NOTE:
ft total.
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
KL201
KL101
www.netstreams.com.