Installation Of A Tl430/Tl700 In A Rough-In Box - Netstreams DigiLinX Installation And Design Manual

4.
NOTE:
wall to give them room to grab.
5.

Installation of a TL430/TL700 in a Rough-In Box

For instructions on installing a TL430/TL700 in a rough-in box, refer to the Dealer
section of the NetStreams web site and see Technical Bulletin 040031 - Installing a
TL430 or TL700 in a Rough-In Box.
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
Screw the mounting screws at the top right and bottom left until the butterfly tabs
catch on the inside of the wall.
For thicker walls back out the butterfly tabs before inserting the TouchLinX into the
Snap on the magnetic face plate.
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
6-5
www.netstreams.com.
TouchLinX