Installation; Installing A Powerlinx Pl600 Or Pl750; Installing In A Rack - Netstreams DigiLinX Installation And Design Manual

DigiLinX Installation and Design Guide

Installation

Installing a PowerLinX PL600 or PL750

9-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
80 Watts at 28VDC
power LED
IEC power cord
CE, C-Tick, and RoHS compliant.
See Figure 9-4 for an example of the PL228.
Figure 9-4 PowerLinX PL228
This section discusses the installation of all PowerLinX devices.
This section discusses installation of the PowerLinX PL600 or PL750 in either a rack
or a free standing environment. Refer to Table 9-1 for the maximum number of
SL220s or SL250s for the PL600 or PL750.
Table 9-1 Maximum Number of SL220s or SL250s per
PowerLinX PL600 or PL750
PowerLinX Model
PL600
PL750

Installing in a Rack

To install a PL600 or PL750 into a rack, complete the following steps:
Install the PL51 plate (sold separately) into the rack.
1.
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
Maximum Maximum
SL220s SL250s
6 0
12 6
www.netstreams.com.