Sw1124; Installation; Installing In A Rack (Sw324 Only) - Netstreams DigiLinX Installation And Design Manual

DigiLinX Installation and Design Guide

SW1124

Installation

Installing in a Rack (SW324 Only)

10-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
The following are the specifications for the SW1048:
technology store and forward architecture, non-blocking
IP multicast supports IGMP snooping (256 multicast addresses)
Dell certified, configured by NetStreams
96 Gbps switching capacity
24 1Gbps ports
4 combo SFP ports
standards: IEEE 802.3, IEEE 802.3u Fast Ethernet, 802.3ab Gigabit Ethernet,
802.3z Gigabit Ethernet, 802.1d Spanning tree, 802.1p priority tags (4 queues),
802.1q VLANS (up to 255), 802.1x Port-Based Authentications, 802.3ad link
aggregation, IAC:SNTP:GVRP support, broadcast storm control, 802.1w Rapid
Spanning Tree, 802.1s Multiple Spanning Tree, Jumbo Grames (9216 bytes), rate
limiting down to 64Kb
Emissions: CE and FCC Class A approved
Power supply, 100-240VAC, 50/60Hz Internal Universal
connector: shielded RJ-45 jack
LED indicators Link/Activity, Full Duplex Collision status for each port
certification: CSA International, FCC Class A, CE Class A. CUL International
environment operating temperature: 0
humidity: operating: 10% to 90 RH, non-condensing;
NetPower: 0
Weight: 3.6Kg
Dimensions: 17.32" wide x 1.73"high x 10.03" deep (440mm x 44mm x 255mm)
19" rack mountable
There are three ways to install the SwitchLinX depending on the model number.
The SwitchLinX is packaged with two detachable rack ears for easy rack mounting.
Mount the SW324 on the back of the rack with the removable IEC power cord fac-
1.
ing front.
Plug in all of the Ethernet connections.
2.
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 /
o o o
to 45 C (32 to 113
www.netstreams.com.
o
F)