Connecting Usb Drives, Peripherals, And Other Devices; Connecting External Displays - SMART Board 7000R Series User Manual

CHAPTER 4
CONNECTING COMPUTERS AND OTHER DEVICES
TIP
If iQ is disabled and you want the OPS PC module's input to appear whenever you wake up
the display, tap the star in the upper-left corner of the OPS PC module's thumbnail.
2. Tap the OPS PC module input.

Connecting external displays

You can connect an external display to duplicate or extend the OPS PC module's desktop.
For more information, see the SMART Board 7000R and 7000R Pro series interactive displays
installation and maintenance guide (smarttech.com/kb/171538).
Connecting USB drives, peripherals, and other
devices
The display includes two USB 3.0 Type-A receptacles on the convenience panel and three USB
3.0 Type-A receptacles on the connector panel. You can connect USB drives, peripherals (such as
keyboards), and other devices to these connectors and use the devices with the iQ experience,
connected computers, and devices installed in the accessory slot (such as the SMART OPS PC
module).
The following table shows which USB 3.0 Type-A receptacles you can use with each input source
and the supported USB speed:
Input source USB 3.0 Type-A receptacles on the
convenience panel
iQ
37 smarttech.com/kb/171539
(SuperSpeed)
USB 3.0 Type-A receptacles on the
connector panel
(SuperSpeed)