Connecting Room Computers And Guest Laptops; Using Smart Software - SMART Board 7000R Series User Manual

CHAPTER 4
CONNECTING COMPUTERS AND OTHER DEVICES

Using SMART software

For information about using SMART software, see the following pages in the Support section of the
SMART website:
SMART Notebook
l
SMART Learning Suite Online
l
SMART Learning Suite
l
SMART TeamWorks
l
SMART Meeting Pro
l
SMART Product Drivers
l
SMART Ink
l
SMART Remote Management
l

Connecting room computers and guest laptops

You can connect room computers and guest laptops to the display and view and interact with
them.
NOTES
Install SMART software on any computers you connect to the display (see Installing and
l
using SMART software on page 27).
Your organization's installers might have connected cables to the display and run the cables
l
behind a wall or under the floor to a desk or table where you can place your computer.
As shown below, HDMI 1 and HDMI 2 share the Touch 1 USB Type-B receptacle, and HDMI 3
l
and VGA share the Touch 2 USB Type-B receptacle (see Sharing USB Type-B receptacles
on page 35).
You can charge devices connected to the USB Type-C receptacle up to 60 W.
l
29 smarttech.com/kb/171539