RGBlink GX4 User Manual page 26

H POLARITY:horizontal polarity, POS (positive) or
NEG (negative)
V POLARITY:vertical polarity,
POS (positive) or NEG (negative)
RESET: reset above setting if not proper
4. SCREEN
H POS
V POS
H SIZE
V SIZE
MODE FULL SIZE
The setting of <SCREEN> is based on the resolution of the LED
screen,applicable under single picture mode. For example to display
picture on a LED screen with resolution 1408x832, first of all, a resolution
close to or bigger than 1408x832 shall be selected. In this case, 1440x900
or resolution above will be proper choice. The closer to the LED screen
resolution, the better the display will be.
H SIZE:horizontal pixels, turn the knob or use the digital button to input
1408.
V SIZE:vertical pixels, turn the knob or use the digital button to input 832.
H POS:horizontal position, default 0, set the value as the way of H SIZE
and V SIZE.
V POS:vertical position, default 0, set the value as the way of H SIZE and V
SIZE.
MODE-- Mode option, select SCREEN SIZE.
RESET:If image quality distorts by improper operation, it can be recover
GX4
185
RESET
41
1920
1080
User Manual
26