Manual Class Mode With 2 Or More Originals-Making Variable Numbers Of Prints From Different Originals - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 67 Tuesday, January 25, 2000 3:03 PM
Manual Class Mode with 2 or More Originals—Making Variable Numbers of Prints from Different Originals
Manual Class Mode with 2 or More
Originals—Making Variable Numbers of
Prints from Different Originals
Preparation
To use this function, you have to
select "by each original" with the
"Class Manual Set" setting in the
user tools. See "Class Manual Set"
⇒ P.152 "4. Mode Setting".
Use the {Class} key to make sets of
prints from different originals. Vari-
ous numbers of prints are made for
each set.
A
B
C
D
Note
When you set Manual Class mode,
Job Separation mode is automati-
cally turned on. The job separator
pulls the top sheet of the each set
delivered to the paper delivery
tray to mark the end of each print-
ed set. The next cycle begins auto-
matically.
Separation—Separating Printing Sets
in the Paper Delivery Tray".
You can cancel Job Separation
mode in Manual Class mode with
the user tools (see "Auto Separate"
⇒ P.152 "4. Mode Setting").
With the optional document feed-
er, you can set several originals
and make prints of all of them at
once. See ⇒ P.92 "Manual Class
Mode with Two or More Originals
Using the Document Feeder".
A B
C D
GRCLAS1E
⇒
See P.85 "Job
A
Press the {Class} key.
1 2 3 4 5
B
Select [Manual] with the [→] or
{}} key.
C
Press the [OK] key.
D
Enter the desired number of
prints for the first original with
the Number keys.
E
Press the {q} key.
1
TPES160E
67