Removing Prints - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 21 Tuesday, January 25, 2000 3:03 PM
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key. See ⇒ P.34 "Adjusting
the Position of Printed Images".
If the image density is slightly
dark or light, adjust the image
density using the {W W }{V V } keys.
See ⇒ P.35 "Adjusting the Image
Density of Prints".
J
Enter the number of prints re-
quired with the Number keys.
Note
To change the number entered,
press the {Clear/Stop} key and
enter the new number.
K
Press the {Print} key.
Note
To stop the machine during a
multi-print run, press the {Clear/
Stop} key.
To return the machine to the in-
itial condition after printing,
press the {Clear Modes/Energy
Saver} key.

Removing Prints

A
Pull the front paper delivery side
plate down towards you to open
it.
Note
You cannot open the rear paper
delivery side plate.
B
Remove the prints from the paper
delivery tray and close the paper
delivery side plate.
Standard Printing
1
21