Job Separation-Separating Printing Sets In The Paper Delivery Tray - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 85 Tuesday, January 25, 2000 3:03 PM
Job Separation—Separating Printing Sets
in the Paper Delivery Tray
The print on the top of each print set on the paper delivery tray is pulled by the
job separator. This function is useful when you make 2 or more print sets.
R CAUTION:
• While printing, do not touch the belt at the end of the paper deliv-
ery tray or the job separator. You might be injured.
Limitation
In Job Separation mode, the following limitations apply:
Metric version
Minimum paper size
Length: 210mm
Width: 128mm
Inch version
Minimum paper size
Length: 8.3"
Width: 5.1"
Note
When you use thin paper, it is not recommended to use Job Separation mode.
The job separator might tear the paper.
If the job separator touches the print image, completed prints might be
marked. In this case, it is not recommended to use Job Separation mode.
When you do not use Job Separation mode, you can select the machine con-
dition after each print set is fed out to the paper delivery tray with the user
tools. See "Auto Class" ⇒ P.152 "4. Mode Setting".
Job Separation—Separating Printing Sets in the Paper Delivery Tray
GRJOBS0E
Maximum paper weight
2
127.9g/m
Maximum paper weight
34 lb
Paper delivery tray capacity
2
600 sheets (64g/m )
Paper delivery tray capacity
600 sheets (17 lb)
1
85