Sort/Class Sort - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 139 Tuesday, January 25, 2000 3:03 PM

Sort/Class Sort

Use this function to have the machine
scan your originals and automatically
sort the prints.
Note
The optional sorter is required.
The paper sizes that can be used
with the Sort and Class Sort func-
tions are as follows:
Metric version
Inch version
The maximum bin capacity is as
follows:
• 50 sheets (52 - 80g/m
21.2 lb)
• 40 sheets (81 - 105g/m
27.8 lb)
If the prints have many images, the
bin capacity might be reduced.
When the number of prints ex-
ceeds the bin capacity, the machine
does the following:
Number of Sets Operation
1 - 20 sets
21 - 40 sets
A3L, B4L,
A4KL, B5L
11" × 17"L, 8 " ×
1
/
2
" ×
1
14"L, 8 /
2
11"KL
2
, 13.9 -
2
, 21.5 -
Prints continue to
be delivered to the
21st bin.
Printing stops.
Printing restarts
when you remove
all prints from the
bins and press the
{Print} key.
When you make prints of less than
20 sets (first job) with the Sort/
Class Sort function, the prints are
delivered to the lower tray bin. If
you make prints (less than 20 sets)
of another original with the Sort/
Class Sort function (second job)
without removing the previously
made prints from the bin, the
prints of the second job will be de-
livered to the upper tray bin of the
sorter.
1: First Job
2: Second Job
When you remove prints from the
bins, be careful not to rub the print-
ed side against the bin. Otherwise,
the printed side might be marked
with ink. This is likely to occur es-
pecially when printing documents
with many images or solid areas.
As an easy solution, place a blank
sheet of paper on top of the stack of
originals before you make the mas-
ter and prints.
Sort/Class Sort
2
139