Ruby-gb3_FM.book Page 55 Tuesday, January 25, 2000 3:03 PM
Selecting a Mode to Match Your Original
Select one of the following four
modes to match your originals:
Letter mode
Select when originals contain only
letters (no pictures).
Letter/Photo mode
Select when originals contain pho-
tographs or pictures with letters.
Photo mode
Select when originals contain pho-
tographs or pictures with delicate
tones.
Pencil mode
Select when originals are written
in pencil.
Note
You can adjust the sharpness of
text in Letter mode with the user
tools (see "Adjusting sharpness of
letters" ⇒ P.152 "4. Mode Setting").
When using Photo mode to print
originals with both text and photo-
graphs, the text will appear lighter.
To avoid this, select Letter/Photo
mode. Alternatively, use the op-
tional Make-up function to specify
Letter mode for text areas and Pho-
to mode for photograph areas.
Selecting a Mode to Match Your Original
Letter/Photo Mode Printing
A
Press the [Original] key.
B
Select [Letter/Photo] with the [→]
or {}} key.
C
Press the [OK] key.
D
Adjust the lightness with the [←]
[→] or {~} {}} keys.
E
Press the [OK] key.
F
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
1
55