User Stamp-Having Custom Messages Stamped On Prints - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 129 Tuesday, January 25, 2000 3:03 PM
User Stamp—Having Custom Messages
Stamped on Prints
Up to 4 messages which you use fre-
quently can be stored in the machine
memory. You can have these messag-
es stamped on your prints.
Preparation
You have to store your message
with the user tools. See ⇒ P.172 "5-
8 Regist. (User)".
Limitation
The optional memory board is re-
quired.
This function cannot be used with
the Stamp function.
Only one message can be stamped
at a time.
Registered stamps cannot be delet-
ed. If you want to change a regis-
tered stamp, overwrite it.
Note
You can change some User Stamp
settings (size, density, or position)
with the user tools. See "Size(User
Stamp)", "Density (User)", "Posi-
tion(User)" ⇒ P.158 "5. Stamp".
User Stamp—Having Custom Messages Stamped on Prints
A
Press the {Stamp} key.
R
B
Select [User Stamping] with the [←]
GRUSTA0E
[→] or {~} {}} keys.
C
Press the [OK] key.
D
Select the desired stamp with the
[←] [→] or {~} {}} keys.
E
Press the [OK] key.
2
129