Ricoh Priport JP5800 Operating Instructions Manual page 135

Ruby-gb3_FM.book Page 115 Tuesday, January 25, 2000 3:03 PM
E
Select the mode for the first com-
mand sheet with the [←] [→] or
{~} {}} {|} {{} keys.
F
Press the [OK] key.
G
If necessary, select the pattern for
the first command sheet with the
{~}, {}}, {|}, or {{} key. Then
press the [OK] key.
H
If necessary, select the size and
direction of the pattern you se-
lected in step G with the [←] [→]
or {~} {}} keys.
I
Press the [OK] key.
Note
Follow steps B – I for the other
command sheets.
You can select a pattern regis-
tered with the user tools for
only one command sheet.
To change the value entered,
press the {Clear/Stop} key and
enter the new value.
Make-up Printing with the Optional Document Feeder
J
After you have finished designat-
ing modes for all the command
sheets, select [Outside Area] with
[←] [→] or {~} {}} keys. Then
press the [OK] key.
K
Select the mode for the outside
area with the [←] [→] or {~} {}}
keys.
L
Press the [OK] key.
Note
When you select Photo mode
for both inside and outside are-
as, you cannot select different
coarseness and image density.
When you want to confirm your
settings, press the {Make-Up}
key twice. Then press the [OK]
key repeatedly until the panel
display reaches the setting you
want to confirm.
2
115