Replacing The Blade/Separating Knife; Replacing The Blade - Roland VersaUV LEC2-300 User Manual

Replacing the Blade/Separating Knife

Replacing the Blade

If the blade becomes dull, if the edge of the blade is chipped, or if the cutting quality is lowered, replace the blade
with a new blade.
CAUTION
CAUTION
Required item
Replacement blade
1.
Replace the blade.
Procedure
1.
Remove any media.
2.
Press [MENU].
3.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MAINTENANCE
5.
Press [▶] once, and then press [▼] several times to display the screen shown below.
MAINTENANCE
REPLACE KNIFE
6.
Press [ENTER].
The cutting carriage moves to a position where replacement is possible.
7.
When the following screen is displayed, open the front cover.
OPEN FRONT
Preparation is complete once the following screen is displayed.
FINISHED?
8.
Detach the blade holder.
236
4. Replacing Consumable Parts
Be sure to perform operations as specified by the instructions, and never touch any area
not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
Never touch the tip of the blade.
Doing so may result in injury.
COVER