Checking Before Output; Lan (Local Area Network) Settings; Preventing Sedimentation In Inks - Roland VersaUV LEC2-300 User Manual

Checking before Output

LAN (Local Area Network) Settings

Check that you can perform communication through the LAN (Local Area Network).
The LAN is enabled if the status LED (
Activity LED
Status LED

Preventing Sedimentation in Inks

The precipitation of the ingredients in the ink disables printing in normal color. So that the ink mixes well, shake
the ink cartridge horizontally with a stroke length of around 5 cm (2 in.) from each end of the ink cartridge.
• Remove the white ink cartridge, shake it 50 times (about 20 seconds), and then reinsert this cartridge.
• The ink cartridges for colors other than white do not need to be shaken before every operation, but be sure to
shake them when installing new ones.
The ingredients in white ink tend to settle. Each day, before starting the day's operations, be sure to shake this
cartridge. Allowing the ink to stand without carrying out these steps can cause the settled material to harden,
resulting in malfunction or other problems.
IMPORTANT
• Before shaking the ink cartridge, wipe off any ink from around its mouth. If you do not wipe off the ink, it may splatter when you
shake the ink cartridge.
• When you have finished mixing the ink, reattach the ink cartridge immediately. Taking time to reattach the ink cartridge will ad-
versely affect the ink path.
• Even if you are not using the printer, shake the white ink cartridge 50 times (about 20 seconds) once a week.
48
2. Basic Operations
) on the LAN connector located on the side of the printer is lit in green.
This flashes yellow while data is being received from the network.
This indicates the status of the communication function. When it lights in green, communication is
possible.