Replacing The Blade/Separating Knife; Replacing The Blade - Roland TrueVIS SG3-540 User Manual

Replacing the Blade/Separating Knife

Replacing the Blade

If the blade becomes dull, if the edge of the blade is chipped, or if the cutting quality is lowered, replace
the blade with a new blade.
WARNING
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the knife with your fingers.
Doing so may result in injury. The cutting performance of the blade will also be impaired.
Required item
Replacement blade
1. Replace the blade.
Procedure
1.
Remove any media.
2.
Tap .
3.
Tap [Maintenance]>[Blade Replacement].
The [Blade Replacement] screen appears.
4.
Tap [Execute].
The cutting carriage moves to a position where blade replacement is possible.
5.
When [Open the front cover.] appears, open the front cover.
MEMO
The procedure is displayed on the operation panel.
• Tap or to check the procedure.
Replacing Consumable Parts
263