Replacing The Separating Knife - Roland VersaArt RE-640 User Manual

Replacing Consumable Parts

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement knife.
CAUTION
CAUTION
1.

Replacing the Separating Knife


Remove any media.
3

Press

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
REPLACE KNIFE

FINISHED?
2.
Replace the separating knife

80
Be sure to perform operations as specified by these instructions, and
never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the blade with your fingers.
Doing so may result in injury.
.
Press
the left appears.
Press
Press
Press
on the left.
Press
The carriage moves to the position where the knife can be replaced,
and the screen shown in the figure appears.
Open the front cover.
Preparations are complete when this screen appears.
② ②
①
several times until the screen shown on
, and then .
.
several times to display the screen shown
.
Remove the separating knife.
Loosen the screw until it slips out.
Grasp the screw portion, and slowly pull
it out in the direction of the arrow. When
doing this, do not pull it back toward you.