Oil Pressure Switch; Oil Pressure Relief Valve - KYMCO MYROAD 700i Service Manual

4
. LUBRICATION SYSTEM

OIL PRESSURE SWITCH

CHECK
Start the engine.
Check the oil pressure indicator goes out after
one or two seconds. If the oil pressure
indicator stay on, stop the engine
immediately and determine the cause.

OIL PRESSURE RELIEF VALVE /

OIL PUMP
REMOVAL
Remove the right crankcase cover.
Remove the pressure relief valve and O-ring
from the right crankcase
.
INSPECTION
Check the operation of the pressure relief
valve by pushing on the piston.
INSTALLATION
Apply oil to a new O-ring and install the
pressure relief valve groove, and install the
relief valve to the right crankcase.
Dust Cover
Oil Pump
O-ring
Oil Pressure Relief Valve
Piston
Oil Pressure Relief Valve
O-Ring
MYROAD 700i
4-4