Valve Clearance - KYMCO MYROAD 700i Service Manual

3
. INSPECTION/ADJUSTMENT

VALVE CLEARANCE

＊
Inspect and adjust the valve clearance
while the engine is cold (Below
35°C/95°F).
Inspection and adjust
Remove the cylinder head cover.
Remove the timing hole cap and O-ring.
Remove the crankshaft hole cap and O-ring.
Turn the crankshaft clockwise and align the
"T" mark on the flywheel with the index
mark on the right crankcase cover.
The punch marks "in" and "ex" on the
camshaft should be aligned with the boundary
of cylinder head as shown.
If the punch marks on the camshaft are facing
downward, turn the crankshaft clockwise one
full turn (360°) and the punch marks are
facing upward.
Timing Hole Cap/O-ring
Crankshaft Hole Cap/O-ring
"T" Mark
Index Mark
Mark "in"
Mark "ex"
MYROAD 700i
3-10