KYMCO MYROAD 700i Service Manual page 2

PREFACE
This Service Manual describes the
technical features and servicing
procedures for the KYMCO XCITING
700.
Section 1 contains the precautions for
all operations stated in this manual.
Read them carefully before any
operation is started.
Section 2 is the removal/installation
procedures for the frame covers which are
subject to higher removal/installation
frequency during maintenance and
servicing operations.
Section 3 describes the inspection/
adjustment procedures, safety rules and
service information for each part, starting
from periodic maintenance.
Sections 8 through 14 give instructions
for disassembly, assembly and adjustment
of engine parts. Section 15 through 17 is
the removal/ installation of chassis.
Section 18 through 21 states the testing
and measuring methods of electrical
equipment.
Most sections start with an assembly or
system illustration and troubleshooting
for the section. The subsequent pages give
detailed procedures for the section.
The information and contents included in
this manual may be different from the
motorcycle in case specifications are
changed.
KYMCO reserves the right to make
changes at any time without notice and
without incurring any obligation.
KWANG YANG MOTOR CO., LTD.
OVERSEAS SALES DEPARTMENT
OVERSEAS SERVICE SECTION
TABLE OF CONTENTS
GENERAL INFORMATION
FRAME COVERS /EXHAUST MUFFLER
INSPECTION/ADJUSTMENT
LUBRICATION SYSTEM
CABLE & HARNESS ROUTING
AFI (AUTOMATIC FUEL INJECTION)
COOLING SYSTEM
ENGINE REMOVAL/INSTALLATION
CYLINDER HEAD/VALVES
CYLINDER/PISTON
DRIVE AND DRIVEN PULLEY
FINAL REDUCTION
A.C. GENEARTOR/STARTER CLUTCH
CRANKCASE/CRANKSHAFT
STEERING HANDLEBAR/FRONT
WHEEL/FRONT SHOCK ABSORBER
REAR FORK/REAR WHEEL/REAR
SHOCK ABSORBER`
BRAKE SYSTEM
BATTERY/CHARGING SYSTEM
IGNITION SYSTEM
ELECTRIC STARTER
LIGHTS/METERS/SWITCHES
ANTI-LOCK BRAKE SYSTEM(ABS)
MYROAD 700i
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22