KYMCO MYROAD 700i Service Manual page 73

3
. INSPECTION/ADJUSTMENT
Place a drain pan under the crankcase and
remove the oil strainer cap.
The setting spring and oil strainer screen will
come out when the oil strainer cap is
removed.
Clean the oil strainer screen.
After draining the oil completely, install the
strainer screen and setting spring into the
engine.
Apply clean engine oil to the strainer cap
threads, flange surface and a new O-ring.
Install and tighten the strainer cap with a new
O-ring.
Torque: 1~2 kgf•m
Strainer Screen
Oil Strainer Screen
Strainer Screen
Strainer Screen
MYROAD 700i
Setting Spring
O-ring
Strainer Cap
Setting Spring
O-ring
Strainer Cap
3-14