KYMCO MYROAD 700i Service Manual page 92

4
. LUBRICATION SYSTEM
ASSEMBLY
Dip all parts in clean engine oil.
Install the outer rotor into the oil pump body.
Install the inner rotor into the outer rotor.
Install the oil pump shaft.
Install the pin onto the oil pump body.
Install the oil pump cover onto the oil pump
body by aligning the dowel pin.
Install and tighten the bolts to the specified
torque.
Torqur: 1.2 kgf•m
INSTALLATION
Install the oil pump and tighten the two bolts
securely.
＊
Make sure the pump shaft rotates freely
and arrow on the oil pump is upside.
4-7
Dowel Pin
Oil Pump Cover
Oil Pump Cover
Bolts
Oil Pump
MYROAD 700i
Oil Pump Cover
Screw
Bolts