Setting the minute minder (touch control timer)
To set the Minute Minder, touch and hold the centre
G
icon. The bell symbol will appear and start flashing.
Important - The flashing will last for approx. 5
seconds so any setting must be set within this
time frame.
Use the Plus and Minus icons to set the length of time
G
required. Once this has been done, the Minute Minder
is set.
When the desired length of time has counted down the
G
alarm will sound. To cancel the tone, touch and hold
any of the icons.
To cancel the Minute Minder at any time, press and hold
G
the Plus and Minus icons together.
Semi Automatic Cooking (Touch control timer)
Duration method (switch off after set time period)
Touch and hold the Function (centre) icon. The bell will
G
flash and beep. Touch the function icon again (This will
skip past the Minute Minder function).
The display will flash the word 'dur', and the 'A' will flash
G
on the left hand side of the display.
Use the Plus and Minus icons to set the length of time
G
you want to cook for. The flashing will last for
approx. 5 seconds, so the setting must be done
within this time frame or the time of day will
show again.
Once the duration has been set, the oven will automati-
G
cally switch off.When the set time has elapsed the alarm
will sound. To switch off the alarm, press any icon.
To view any remaining time touch and hold the function
G
(centre) icon and touch again.
To cancel the semi automatic programme at any time,
G
press the plus and minus icons together.
The End Time method (Switch off at a set end time)
Touch and hold the Function icon. The bell will flash and
G
beep. Touch the function icon again - twice (This will
skip past the Minute Minder and the Duration function)
The display will flash the word 'End' and the 'A' will flash
G
on the left hand side of the display.
Use the Plus and Minus icons to select the time the oven
G
is required to turn off.
Once this is done the oven will turn itself off at the pre-
G
selected time. To turn off the alarm press any icon.
To cancel the Semi Automatic programme at any time,
G
press the plus and minus icons together.
Setting the Programmer