Related Manuals for IDTECK Star RFL200
Summary of Contents for IDTECK Star RFL200
- Page 1 User’s Manual Proximity Access Controller...
-
Page 2: Table Of Contents
Table of Contents 1. Important Safety Instructions................4 2. General ........................4 3. Features.......................5 4. Identifying Supplied Parts .................5 5. Specification .......................6 6. Installation......................7 7. Color Coded & Wiring Table ................8 8. Wire Connection to Controller................8 11. Operation ......................13 12. FCC Registration Information................15... - Page 3 13. Warranty and Service ..................16...
-
Page 4: Important Safety Instructions
1. Important Safety Instructions When using Proximity Access Controller, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons. In addition, the following safety guides should also be followed: 1. Fully read and understand all instructions and follow them completely. 2. -
Page 5: Features
reliable Door Access Operations. 3. Features - 125KHz Standalone Proximity Access Controller - iPASS IP-RFL200C: ASK[EM] Format Star RFL200C: PSK Modulation - 512 Users including One Master Card - Network Communication via RS485 (Max.255ch) TCP/IP (External LAN Converter required, optional) Wireless (e.g. -
Page 6: Specification
(1 ea) (1 ea) (1 copy) 3.0*30 Screw 3.0*25 Screw Anchor Bolt (2ea) (2ea) (2ea) 5. Specification Model RFL200C IP-RFL200C Dual 8bit Microprocessor Program 64KByte Flash ROM Memory Memory Data Memory 4KByte EEPROM User 512 Users 256 Event Buffers Event Buffer IDK50 / IMC125: IPK50: Up to 2 inch (5cm) -
Page 7: Installation
Warranty Life Time Certification FCC, CE, MIC 6. Installation 6-1. Drill one 0.5”(12.7mm) hole at the central of the RFL200 / IP-RFL200 on mullion or wall mount. Route the cable of reader module through the central hole. 6-2. Drill one 0.39"(10mm) in right horizontal and 1.74"(44.4mm) in upper vertical through the central hole. -
Page 8: Color Coded & Wiring Table
7. Color Coded & Wiring Table SIGNAL COLOR Main Power (+12V) Power Ground (GND) Black Aux In 1 Yellow Door Contact In Blue Exit Button In Green Alarm Out Purple Door Lock Out White RS485 (A) Gray RS485 (B) Orange Not Connect Brown * Please cut out tail connector before installation. - Page 9 8-1. Connecting a power supply - Connect +12V of power supply to Red wire. - Connect GND of power supply to Black wire. 8-2. Connecting a door lock - Connect (+) wire of door lock to +12V wire of power supply. - Connect (-) wire of door lock to white wire of reader module.
- Page 10 RFL200C / 485 Converter IP-RFL200C 485(-) Orange wire 485(+) Gray wire 9. Network connection to the access controller 9-1 Up to 255 Units of RFL200C / IP-RFL200C - Max. 255 units (Board ID : 1~255) can be installed in a loop. - Able to connect directly via RS485 or RS232 converter.
- Page 11 10. Set up Hardware All parameters of STAR RFL200C / IP-RFL200C are set by the application software. 10-1 Set up “System Address” and “Normal” or “Toggle Mode”. ① Choose “System Name” and “System Address” on drop down list. ② Click “Normal Mode” or “Toggle Mode”. ③...
- Page 12 10-3 Card Holder Registration or Deletion - Card Holder Registration or Deletion is performed by the application software. ① Choose “INPUT CARD DATA” and “EMPLOYEE INFORMATION”. ② Click “Save” and then “Transmit” button. INPUT CARD DATA EMPLOYEE INFORMATION 10-4 System Initialization STAR RFL200C / IP-RFL200C is initialized by the software.
-
Page 13: Operation
10-5 LED Color Control The RFL200C / IP-RFL200C can change its LED color to red or green by the application software. SELECT RFL200C LED COLOR SELECT See “STAR RFL200C” software manual to set up hardware. 11. Operation 11-1. When power is supplied (1) All LEDs display red or green. - Page 14 (1) All LEDs turn red. Then they repeat on/off twice and become on. (2) RFL200C / IP-RFL200C’s buzzer sounds twice. 11-4. When door is opened and read user card on RFL200C / IP-RFL200C (1) The upper of two LEDs still display green color. It means that open the door. With the rest of LEDs, they indicate whether authentication or not.
-
Page 15: Fcc Registration Information
② As power on, all LEDs display red or green color. After repeating on/off twice, LEDs are off. ③ As power off, green LED turns on from the under to the top in order. All LEDs display green color. ④ The RFL200C / IP-RFL200C’s beeper sounds four times that is finished to initialize. ⑤... - Page 16 E-mail: webmaster@idteck.com Website: www.idteck.com U.S Branch: RF Logics Inc. 370 Amapola Ave, #106 Torrance, CA 90501 Tel: 310-782-8383 Fax: 310-782-8298 E-mail: rflogics@rflogics.com Website: www.rflogics.com Hong Kong Branch: IDTECK Hong Kong 12/F, B2B Centre, No.36 Connaught Road West, Hong Kong Tel: 852-2581-9580...
- Page 17 Fax: 852-2234-5150 E-mail: alchu@qala.com.hk Website: www.ristarhk.com Please use the original container, or pack the unit(s) in a sturdy carton with sufficient packing to prevent damage and include the following information: 1. A proof-of-purchase indicating model number and date of purchase. 2.
- Page 18 The specification contained in this manual are subject to change without notice at any time. May 2006 Copyright ©2006 IDTECK Co., Ltd. MAML20CHE3X...
- Page 19 5F, Ace Techno Tower B/D, 684-1, Deungchon-Dong, Gangseo-Gu, Seoul, 157-030, Korea Tel : +82-2-2659-0055 Fax : +82-2-2659-0086 E-mail : webmaster@idteck.com...