3.3.1.3
mSATA SSD
You need:
a PH1 screw driver
a standard mSATA SSD
the mSATA mounting screw (included in the unit)
An mSATA compliant SSD can be installed at location M3:
1.
Make sure the mSATA disk is compliant with the socket and that the mechanical
keys match
2.
Insert the mSATA module in the connector under an angle of around 45°. The
gold contacts of the module will almost disappear in the connector when the
module is fully seated.
Figure 3.25 USB DOM mounting
Figure 3.26 mSATA mounting screw
Figure 3.27 mSATA key alignment
57
FWA-1320 User Manual