3.
Push down the module softly until it is in horizontal position. If the module is cor-
rectly seated, the module's right hand mount hole will align with the threaded
standoff in the FWA-1320 motherboard. Insert the mSATA mounting screw and
tighten it.
3.3.2
Memory Installation
After removing the top cover, follow the instructions below for DIMM installation:
1.
Double check that the DIMMs to be installed match the requirements of section
2.4.5.
2.
Open the white latches on the left and right sides of the DIMMs by turning it out-
wards as indicated by the arrows below.
FWA-1320 User Manual
Figure 3.28 mSATA angled insertion
Figure 3.29 mSATA mounting
58