Risk of burns and damage to
Released humidity can cause burns. After
the function stops, carefully open the
1. Fill the cavity embossment with tap
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
Do not refill the cavity
cooking or when the
oven is hot.
7. CLOCK FUNCTIONS
7.1 Clock functions table
TIME OF DAY
2. Set the function:
3. Press: Plus Steam
It works only with the function: True Fan
The indicator turns on.
4. Turn the control knob to set
5. Preheat the empty oven for 10
minutes to create humidity.
6. Put food in the oven.
Refer to "Hints and tips" chapter.
Do not open the oven door during
7. Turn the knob for the heating
functions to the off position, press
The indicator turns off.
8. Remove water from the cavity
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE MIND-
ER at any time, also when the appliance is off.
to turn off the oven.
Make sure that the oven
is cold before you
remove the remaining
water from the cavity