Siruba Sew Reach D007S Instruction Book page 5

2. 安裝與準備
2-1 教育與訓練
裝置針車的操作人員，以及從事指導保全
維修的幹部，必須要有正確知識和操作的
技能。管理階層應在事前對於作業人員以
及幹部的教育與訓練計畫，做好完整的籌
劃以及執行。
2-2 教育與訓練
(1) 採用能夠承受針車的自重，以及運轉
時的反彈應力強度的檯板與腳架。
(2) 應充分考量配置針車及作業區域的照
明，以供能夠順利的從事作業的環境。
(3) 配置裝置的針車在配裝控制箱以及相
關件的時候，要注意到與作業人員作
業姿勢的關係。
(4) 安裝馬達時，應依照馬達廠商所提供
的使用說明書正確安裝。
2-3 電路配線
(1) 在裝設電路完成之前，請勿接上電源
接頭。
(2) 連接針車頭部和馬達以及電器裝置的
電線接頭，務必確實固定。
(3) 對於連接的電線電纜，勿施加超負荷
的壓力。
(4) 在會有動作的機械部份之附近，對於
電線電纜的配置，應考安全距離，不
可使其接觸或磨擦。
(5) 在針車的頭部指定部位確實接妥接地
線。
2-4 在針車運轉之前的注意事項
(1) 在注入潤滑油、矽油、黃油的時候，
注意不要接觸到眼睛皮膚等。在保管
方面，要避開幼童所能取到的位置。
(2) 針車務必先行注油之後才運轉。
(3) 要切入電源的時候，勿把手伸入車針
下方附近及有動作的機械部位。
2.Installation and preparation
2-1 Instruction and training
Operators who assemble the sewing
machine and instructors who responsible
for repair and maintenance, need to have
correct knowledge and operation skills.
The managers should prepare and execute
the instructions and training plan for the
operators and supervisors beforehand.
2-2 Sewing table and motor
(1)Apply the table and foot stool which can
withstand machine's weight and intensity
of rebound stress while operating.
(2)Should consider sewing machine working
area's lighting to provide the environment
which operators could work smoothly.
(3)When installing the control box and the
related parts of the sewing machine, pay
attention the posture about the workers.
(4)Please follow the instruction from motor
manufacturer to install the motor.
2-3 Wiring
(1)Before circuit assembly finished, do not
connect the plug for power supply.
(2)Must fix the wire of sewing machine
head, motor, and electric device
securely.
(3)For connected electric cable, do not put
excessive force on it.
(4)For electric cord equipment, should
keep the safe distance away from
moveable mechanic parts to avoid
connect or friction.
(5)Connect the ground wire on assigned
position of sewing machine head
securely.
2-4 Instructions before operation
(1)When pour into lubricant, silicone oil,
and grease, be careful do not attach
on your eyes and skin. And keep these
where children cannot reach.
(2)Before operation, the sewing machine
must be lubricated.
(3)Do not put your hand under the needle
or near the moving parts of the machine
when turn the power on.
Introduction
P2