DFI AL102 User Manual page 36

Advanced
X
Console Redirection
InsydeH2O Setup Utility
Advanced
Console Serial Redirect <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Console Serial Redirect
This field is used to enable or disable the console serial redirection function. When Console Se-
rial Redirect is set to <Enabled>, several options will be available for configuration.
InsydeH2O Setup Utility
Advanced
Console Serial Redirect <Enabled>
Terminal Type <VT_100>
Baud Rate <115200>
Data Bits <8 Bits>
Parity <None>
Stop Bits <1 Bit>
Flow Control <None>
COM1
X
Enable VT-100, 115200, N81
COM2
X
Disable VT-100, 115200, N81
COM3
X
Disable VT-100, 115200, N81
COM4
X
Disable VT-100, 115200, N81
COM5
X
Disable VT-100, 115200, N81
COM6
X
Disable VT-100, 115200, N81
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
User's Manual | AL102
Rev. 5.0
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Rev. 5.0
Enable Console Redirec-
tion Function
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
The configuration here is used globally for all COM ports. To set up different values for each
COM port, please enter the sub-menus below the terminal fields.
Terminal Type
Select terminal type: VT_100, VT_100+, VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate: 115200, 57600, 38400, 19200 or 9600.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: none, even or odd.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: none, RTS/CTS or XON/XOFF.
Note:
Additional COM ports (COM7~COM10) are available when the EXT-RS232/RS485
card is mounted via the LPC connector.
Chapter 3
BIOS SETTING
35