DFI AL102 User Manual page 34

Advanced
X
Audio Configuration
InsydeH2O Setup Utility
Advanced
Audio Controller <Enabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Audio Controller
Enable or disable HD audio support.
Disabled HD Audio will be disabled.
Enabled HD Audio will be enabled.
User's Manual | AL102
Rev. 5.0
Enable/Disable HD-Audio
Support
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Advanced
X
SATA Configuration
InsydeH2O Setup Utility
Advanced
SATA Controller <Enabled>
SATA Mode Selection <AHCI>
SATA Speed Selection <Gen3>
SATA Port 0 [Not Installed]
SATA Port 0 <Enabled>
Hot Plug <Disabled>
SATA Port 1 [Not Installed]
SATA Port 1 <Enabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
SATA Controller
Enable or disable the Serial ATA controller. This following fields will only be displayed when this
field is enabled.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Control-
ler Interface).
SATA Speed Selection
Select Serial ATA controller(s) speed from Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s) or Gen 3 (6
Gbit/s).
SATA Port 0 and 1/Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
Chapter 3
BIOS SETTING
Rev. 5.0
Enables or Disables the
Chipset SATA Controller.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
33