DFI AL102 User Manual page 12

Jumper Settings
X
LCD/Inverter Power Select
The power level supplied to the LVDS/eDP inverter power connector can be switched between
+5V or +12V via JP10.
3 2 1
„ 1-2 On: +12V (default)
Important:
Before powering-on the system, make sure that the setting of JP10 matches the
specifications of the LVDS/eDP LCD. Incorrect power voltage may cause irrevers-
ible damage to your LCD panel.
User's Manual | AL102
JP10
1
3 2 1
„ 2-3 On: +5V
Jumper Settings
X
Backlight Brightness Select
The power level supplied to the LCD backlight can be switched between +3.3V or +5V via JP9.
3 2 1
„ 1-2 On: +V (default)
Important:
Before powering-on the system, make sure that the setting of JP9 matches the
specifications of the LCD's backlight power. Incorrect power voltage may cause ir-
reversible damage to your LCD's backlight.
Chapter 2
HARDWARE INSTALLATION
1
JP9
3 2 1
„ 2-3 On: +5V
12