Rj45 Lan Ports - DFI AL102 User Manual

Rear I/O Ports
X
Graphics Display
„ HDMI
„ VGA
HDMI
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.
VGA
The VGA port is used for connecting a VGA monitor. Connect the monitor's 15-pin D-shell cable
connector to the VGA port. After you plug the monitor's cable connector into the VGA port, gen-
tly tighten the cable screws to hold the connector in place.
BIOS Setting
Configure the display devices in the advanced menu ("Video Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the graphics driver. Refer to the chapter 4 for more information.
User's Manual | AL102
Rear I/O Ports
X

RJ45 LAN Ports

„ LAN 1 „ LAN 2
The two LAN ports allow the system board to connect to a local area network by means of a
network hub.
BIOS Setting
Configure the onboard LAN ports in the Advanced menu ("ACPI Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to the chapter 4 for more information.
Features
• 2 x Realtek RTL8111H-CG Ethernet controllers
Chapter 2
HARDWARE INSTALLATION
16