DFI AL102 User Manual page 14

X Rear I/O Ports
„ COM 1 „ COM 2
„ DC In „ HDMI „ VGA
The rear panel I/O ports consist of the following:
• DC In
• 1 x HDMI 1.4
• 4 x USB 3.0
• 2 x GbE (RJ-45)
• 2 x RS-232 (DB-9)
• Audio Line Out (optional)
User's Manual | AL102
„ LAN 1 „ LAN 2
„ 4 x USB 3.0 „ Audio Line Out
12V DC In
„ DC In coaxial
Connect a coaxial DC power cord to the rear coaxial connector for DC supply. The vertical or
right angle 4-pin types are avaible upon request.
4-pin right angle (optional)
Important:
Using a voltage higher than the recommended range may result in failure in start-
ing and booting the system or causing irreversible damage to the system board.
A power adaptor/converter is necessary when the power source on site does not
comply with the power specifications of the board.
Chapter 2
HARDWARE INSTALLATION
4-pin vertical (optional)
DC In coaxial
15