DFI AL102 User Manual page 31

X Main
The Main menu is the first screen that you will see when you enter the BIOS Setup Utility.
InsydeH2O Setup Utility
Main Advanced Security Boot Exit
Project Name AL102
BIOS Version B196. 12A
Intel(R) Atom(TM) Processor E3940 @ 1.60GHz
CPU Speed 1600 MHz
CPUID 0x506C9
24 KB
L1 Data Cache
32 KB
L1 Instruction Cache
1024 KB
L2 Cache
0 KB
L3 Cache
4 Core(s) / 4 Thread(s)
Number Of Processors
B1 Stepping
BXT SOC
00000032
Microcode Rev
4096 MB
Total Memory
1600 MHz
System Memory Speed
[Not Installed]
SODIMM 0
4096 MB
SODIMM 1
TXE FW Version 3. 1. 55. 2269
System Time [15:35:35]
System Date [07/08/2019]
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
System Time
The time format is <hour>, <minute>, <second>. The time is based on the 24-hour military-time
clock. For example, 1 p.m. is 13:00:00. Hour displays hours from 00 to 23. Minute displays min-
utes from 00 to 59. Second displays seconds from 00 to 59.
System Date
The date format is <month>, <date>, <year>. Month displays the month, from 01 to 12.
Date displays the date, from 01 to 31. Year displays the year, from 2000 to 2099.
User's Manual | AL102
Rev. 5.0
T h i s i s t h e h e l p f o r t h e
hour, minute, second field.
Valid range is from 0 to 23,
0 to 59, 0 to 59. INCREASE/
REDUCE: +/-.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
X Advanced
The Advanced menu allows you to configure your system for basic operation. Some entries are
defaults required by the system board, while others, if enabled, will improve the performance
of your system or let you set some features according to your preference.
Important:
Setting incorrect field values may cause the system to malfunction.
InsydeH2O Setup Utility
Main Advanced Security Boot Exit
ACPI Configuration
X
CPU Configuration
X
Video Configuration
X
Audio Configuration
X
SATA Configuration
X
PCI Express Configuration
X
Console Redirection
X
SIO NUVOTON6116D
X
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Chapter 3
BIOS SETTING
Rev. 5.0
ACPI Configuration Setting
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
30