DFI AL102 User Manual page 33

Advanced
X
CPU Configuration
InsydeH2O Setup Utility
Advanced
EIST <Enabled>
Turbo Mode <Enabled>
C-States <Enabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
EIST
This field is used to enable or disable the Enhanced Intel SpeedStep
optimize the balance between system's power consumption and performance. After it is en-
abled in the BIOS, EIST features can then be enabled via the operating system's power manage-
ment.
Turbo Mode
Enable or disable turbo mode of the processor. This field will only be displayed when EIST is
enabled.
C-States
Enable or disable CPU Power Management. It allows CPU to go to C States when it's not 100%
utilized.
User's Manual | AL102
Rev. 5.0
Enable/Disable Intel Speed-
Step
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Technology, which helps
®
Advanced
X
Video Configuration
InsydeH2O Setup Utility
Advanced
Primary Display <IGD>
Integrated Graphics Device <Enabled>
PTN3460 Function <Enabled>
LCD Panel Type <1024X768>
LCD Panel Color Depth <24 Bit>
Backlight Type <Normal+PWM Mode>
P r i m a r y D i s p l a y
IGD
PCIe
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Primary Display
Select either IGD or PCIe Graphics device to be the primary display.
Integrated Graphics Device
Keep IGD enabled or disabled based on the setup options.
PTN3460 Function
Enable or disable PTN3460 LCD features.
LCD Panel Type
Please check the specifications of your LCD monitor. Select the type of LCD panel con-
nected to the system's LCD connector: 800X480, 800X600, 1024X768, 1366X768, 1280X1024,
1920X1080 or 1920X1200.
LCD Panel Color Depth
Select the LCD panel color depth: 18 Bit, 24 Bit, 36 Bit or 48 Bit.
Backlight Type
Set the backlight type: Normal+PWM Mode, Normal+DC Mode, Invert+PWM Mode or
Invert+DC Mode.
Chapter 3
BIOS SETTING
Rev. 5.0
Select which of IGD/PCIe
Graphics device should be
Primary Display
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
32