Stop. You Have Completed This Procedure - Cisco ONS 15310-MA SDH Procedure Manual

Required Tools and Equipment
Figure 1-11
Install and tighten the six panhead screws onto the holes on the hexagonal standoffs.
Step 4
Note

Stop. You have completed this procedure.

Cisco ONS 15310-MA SDH Procedure Guide, R9.0
1-38
Installing the Rear Cover
You can also reverse the order of the procedure, and install the panhead screws onto the
hexagonal standoffs first, place the rear cover on the standoffs, and finally tighten the panhead
screws. The rear cover has oval cut-outs to allow this operation.
Chapter 1
1/4-inch hexagonal
standoff, 6-32x1.75
DS1 plug
connector
Install the Cisco ONS 15310-MA SDH
78-18668-01